Overview

A Rugged ESC for Drones and Autonomous Systems

The QuadDrive 80A is a compact, connectorized 4-in-1 electronic speed controller (ESC) designed for NDAA-compliant unmanned aerial systems, robotics, and autonomous vehicles.

Designed for demanding autonomous platforms, QuadDrive supports PWM and DShot, running BLHeli_32 firmware to while delivering up to 80A continuous current in a single motor.

Built for NDAA-Compliant UAS Platforms

Supporting 6S (24V) battery systems and motors in the 700–1100 KV range, QuadDrive is optimized for 10-inch-class quadrotor platforms. Its compact 68 mm × 56 mm footprint with connectors included reduces wiring complexity and simplifies integration compared to discrete ESC solutions.

Integrated Power Distribution and Protection

QuadDrive combines motor control and power management in a single module, reducing system complexity and component count. Protection features include reverse polarity protection, TVS surge suppression, high-current power distribution, and connector or pad-based motor interfaces.

Board Map

Dimensional Drawing

Technical specifications

Number of Motors	Up to 4
Continuous Current	80A per motor
Battery Voltage	6S (24V)
Control Interfaces	PWM, DShot, CAN, Ethernet
Firmware	AM32, BLHeli
Motor KV Range	700–1100 KV
Telemetry	RPM, Current, Voltage, Temperature, Position
Power Connector	XT60
Motor Connectors	MR60 or Exposed Pads
Operating Temperature	-45°C to 85°C
Dimensions	68 mm × 56 mm × 15 mm

Downloads

QUADDRIVE REV B DATASHEET

Pairs with

Shop all

BotBlox Custom PicoBlade to Tinned Leads, 4 way

BotBlox Custom PicoBlade to Tinned Leads, 4 way This is the BotBlox PicoBlade to Tinned Leads, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This cable is used to power all our boards (except SPEBlox Rev F, which uses a 2-way cable to reduce size). These cables are provided as Unshielded Untwisted cables and can carry a maximum current of 5 Amps. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. Please be aware that if you...

From

BotBlox Custom PicoBlade to RJ45 cable, 4 way

BotBlox Custom PicoBlade to RJ45 cable, 4 way This is the BotBlox PicoBlade to RJ-45, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100Mbps boards, but with a customised length to achieve efficient cabling in your system.These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoBlade...

From

BotBlox Custom PicoClasp to RJ45 cable, 4 way

BotBlox Custom PicoClasp to RJ45 cable, 4 way This is the BotBlox PicoClasp to RJ-45, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100Mbps boards, but with a customised length to achieve efficient cabling in your system.These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoClasp...

From

BotBlox Custom PicoClasp to Tinned Leads, 4 way

BotBlox Custom PicoClasp to Tinned Leads, 4 way This is the BotBlox PicoClasp to Tinned Leads, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This cable is used to power all our boards (except SPEBlox Rev F, which uses a 2-way cable to reduce size). These cables are provided as Unshielded Untwisted cables and can carry a maximum current of 5 Amps. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. Please be aware that if you...

From

Puck Mini | Tiny Rugged 4 Port GigaBit Switch

Ultra compact, rugged, NDAA compliant 4 port GigaBit switch for drones, aerospace and vehicles.

Input Voltage Range: 5-60V
Power Consumption: 4.6W maximum
Ports: 4 x 10M/100M/1Gb ports

From

BotBlox PicoBlade to RJ45 cable, 4 way, 0.3 meters

SwitchBlox Data Cable This is the BotBlox PicoBlade to RJ-45, 4-way 0.3 meter cable, designed to provide data connectivity to our 10/100M capable boards. This cable is compatible with the following boards in our range. SwitchBlox SwitchBlox Nano SwitchBlox Rugged SPEBlox Long Cable Signal Performance Diagrams Before Cable After Cable<

From$8.00

Overview

A Rugged ESC for Drones and Autonomous Systems

Built for NDAA-Compliant UAS Platforms

Integrated Power Distribution and Protection

Board Map

Dimensional Drawing

Technical specifications

Downloads

Pairs with

BotBlox Custom PicoBlade to Tinned Leads, 4 way

BotBlox Custom PicoBlade to RJ45 cable, 4 way

BotBlox Custom PicoClasp to RJ45 cable, 4 way

BotBlox Custom PicoClasp to Tinned Leads, 4 way

Puck Mini | Tiny Rugged 4 Port GigaBit Switch

BotBlox PicoBlade to RJ45 cable, 4 way, 0.3 meters

QuadDrive 80A | 4-in-1 Electronic Speed Controller

Technical specifications

Downloads

QuadDrive 80A | 4-in-1 Electronic Speed Controller

QuadDrive 80A | 4-in-1 Electronic Speed Controller

QuadDrive 80A | 4-in-1 Electronic Speed Controller

BotBlox Custom PicoBlade to Tinned Leads, 4 way

BotBlox Custom PicoBlade to RJ45 cable, 4 way

BotBlox Custom PicoClasp to RJ45 cable, 4 way

BotBlox Custom PicoClasp to Tinned Leads, 4 way

Puck Mini | Tiny Rugged 4 Port GigaBit Switch

BotBlox PicoBlade to RJ45 cable, 4 way, 0.3 meters