Baseboards, adapters, and cables to complete your build.
26 products
An ultra compact USB to Ethernet Converter for direct integration in drones, robots and other embedded applications.
BotBlox Custom PicoClasp to Tinned Leads, 4 way This is the BotBlox PicoClasp to Tinned Leads, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This cable is used to power all our boards (except SPEBlox Rev F, which uses a 2-way cable to reduce size). These cables are provided as Unshielded Untwisted cables and can carry a maximum current of 5 Amps. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. Please be aware that if you...
BotBlox Custom PicoClasp to RJ45 cable, 4 way This is the BotBlox PicoClasp to RJ-45, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100Mbps boards, but with a customised length to achieve efficient cabling in your system.These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoClasp...
A Compact Breakout of 4 1GBASE-T ports for UbiSwitch UbiSwitch Baseboard Mini is a incredibly compact connectivity breakout board for the BotBlox UbiSwitch Module that provides 4 x 10/100/1000Mbps (gigabit) ethernet ports on Molex Picoclasp headers. This allows UbiSwitch to be quickly tested and deployed in a networking application. UbiSwitch BaseBoard Mini is 42mm x 42mm, the same size as the UbiSwitch Module.This board provides the most compact way to use UbiSwitch in applications where only...
Documentation SFP-10G-T DATASHEET Extended Temperature Range 10G Copper SFP Module The 10G copper SFP module is a high-speed networking device designed for reliable and efficient 10Gbps data transmission over RJ-45 copper cabling with an operating temperature range from -40°C to 80°C. This module is fully compatible with UbiSwitch and UbiSwitch Baseboard and allows the 3 SFP ports to be converted to a 10GBASE-T copper interface. This module features an advanced Marvell Ethernet PHY that enables...
SwitchBlox Data Cable This is the BotBlox PicoBlade to RJ-45, 4-way 0.3 meter cable, designed to provide data connectivity to our 10/100M capable boards. This cable is compatible with the following boards in our range. SwitchBlox SwitchBlox Nano SwitchBlox Rugged SPEBlox Long Cable Signal Performance Diagrams Before Cable After Cable<
BotBlox Custom PicoBlade to Tinned Leads, 4 way This is the BotBlox PicoBlade to Tinned Leads, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This cable is used to power all our boards (except SPEBlox Rev F, which uses a 2-way cable to reduce size). These cables are provided as Unshielded Untwisted cables and can carry a maximum current of 5 Amps. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. Please be aware that if you...
BotBlox Custom PicoBlade to RJ45 cable, 8 way This is the BotBlox PicoBlade to RJ-45, 8-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100/1000Mbps boards, but with a customised length to achieve efficient cabling in your system. These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex...
BotBlox Custom PicoBlade to RJ45 cable, 4 way This is the BotBlox PicoBlade to RJ-45, 4-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100Mbps boards, but with a customised length to achieve efficient cabling in your system.These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoBlade...
